TP-Link EX230v Router – LED Status Light Guide
Understanding the LED indicators on your TP-Link EX230v router can help you ensure it's functioning optimally. Below is a guide to each LED and its meanings:
Power LED
-
Solid Green: Router is powered on and operating normally.
-
Off: Router is powered off.
Internet LED
-
Solid Green: Connected to the internet.
-
Flashing Green: Data is being transmitted or received.
-
Solid Red: No internet connection detected.
2.4GHz Wi-Fi LED
-
Solid Green: 2.4GHz wireless band is active.
-
Flashing Green: Data is being transmitted over the 2.4GHz band.
-
Off: 2.4GHz band is disabled.
5GHz Wi-Fi LED
-
Solid Green: 5GHz wireless band is active.
-
Flashing Green: Data is being transmitted over the 5GHz band.
-
Off: 5GHz band is disabled.
LAN (Ethernet) LEDs
-
Solid Green: Device connected to the corresponding LAN port.
-
Flashing Green: Data is being transmitted or received through the LAN port.
-
Off: No device connected to the LAN port.
WPS LED
-
Flashing Green: WPS connection is in progress.
-
Solid Green: WPS connection established successfully.
-
Off: WPS is not active.
USB LED
-
Solid Green: USB device is connected and recognized.
-
Flashing Green: Data is being transmitted or received via the USB port.
-
Off: No USB device connected.
Phone LED (VoIP)
-
Solid Green: VoIP service is registered and ready.
-
Flashing Green: Phone is in use or there's an incoming call.
-
Off: VoIP service is not registered.
If you notice any unexpected LED behaviors or require further assistance please contact our customer service team.
